• Type II wallcovering, ASTM F793 complaint for durability characteristics.⁵
• Class A rated flame-spread performance material.⁷
• Over 20 years indoor display permanence.⁸
• Wide range of textures (embossable).
• Works with common primers, pastes, finishing, and installation methods.

• REACH compliant⁹
• PCV-free¹ alternative, easier to dispose of than most PVC-based substrates
• FSC®-certified paper⁴
• UL GREENGUARD GOLD Certified prints³
• Compliant with CHPS Section 01350 specification¹⁰
• Earn LEED credits¹¹
• Highly mold and mildew resistant¹²
• Carries the CE certification¹⁵

3 in

280 g/m² per TAPPI T-410 Test Method

431 microns/16 mil per TAPPI T-411 Test Method

94% per TAPPI T‑425 Test Method

Matte, Suede Texture

20+ years, away from direct sun with HP Latex Inks⁸

3+ years, unlaminated with HP Latex Inks¹³

Water-resistant with HP Latex Inks¹⁴

Class A, CA 1237, B1, M1, ISO 5660 rated flame-spread material⁷

Product of China

No

15 to 35° C / 59 to 95° F

30 to 80% RH

Instant Dry

2 years, unopened in original packaging

HP large format printing materials are free from defects in materials and workmanship. For warranty statement, please see HPLFMedia.com/mediawarranties

1 Chemical analysis demonstrated elemental chlorine to be at or below 200 ppm. Presence of chlorine is attributed to residual chlorine used in the papermaking process, and not due to the presence of PVC.
2 Based on a comparison of HP Latex Ink technology to competitors with leading market share as of December, 2013 and analysis of published MSDS/SDSs and/or internal evaluation. Performance of specific attributes may vary by competitor and ink technology/formulation.
3 With HP Latex Inks. UL GREENGUARD GOLD Certification to UL 2818 demonstrates that products are certified to UL’s GREENGUARD standards for low chemical emissions into indoor air during product usage. For more information, visit ul.com/gg or greenguard.org.
4 HP trademark license code FSC®-C017543, see fsc.org. Not all FSC®-certified products are available in all regions.
5 HP PVC-free Durable Suede Wall Paper is compliant with the ASTM F793 standard (Type II) when printed at full coverage using Original HP 792 Latex Inks on the HP Latex 200 Printer series or HP 831 Latex Inks on the HP Latex 300 Printer series or HP LX610 Latex Inks on the HP Latex 800 Printer series or HP 881 Latex Inks on the HP Latex 3000 Printer. To avoid staining in unprinted areas, HP recommends cleaning the area within 30 minutes of any spill using a non-abrasive sponge with warm water and a mild dishwashing detergent.
6 Prints on HP PVC-free Durable Suede Wall Paper with Original HP 831 Latex Inks on the HP Latex 300 Printer series or HP 792 Latex Inks on the HP Latex 210/260/280 Printers have a color gamut ≥ 430K CIELab units. Type II wallcovering complaint with ASTM F793 for durability characteristics.
7 Tested to ASTM E84-13a for burning characteristics. Rated per section 803.1.1 of the International Building Code.
8 With HP Latex Inks. Display permanence rating for interior displays/away from direct sunlight, by HP Image Permanence Lab. See HPLFMedia.com/t/printpermanence.
9 This product does not contain substances listed as SVHC (155) per Annex XIV of the EU REACH directive published as of June 16, 2014 in concentrations exceeding 0.1%. To determine the status of SVHC in HP products, see the HP REACH Declaration published at HP Printing Products and Consumable Supplies. Logo source: Copyright European Chemicals Agency.
10 UL GREENGUARD GOLD Certified prints exceed the Special Environmental Requirements of the Collaborative for High-Performance Schools (CHPS), California Department of Public Health Standard Practice Section 01350 specification for indoor air emissions, and are accepted by Green Globes and Green Guide for Healthcare programs. See chps.net.
11 To obtain US LEED credits based on FSC® certification, the builder must purchase HP PVC-free Durable Suede Wall Paper printed with HP Latex Inks from an FSC Chain of Custody certified print service provider. To obtain LEED credits based on UL GREENGUARD GOLD Certification, HP PVC-free Durable Suede Wall Paper printed with HP Latex Inks must be part of a wall system in which all components are UL GREENGUARD GOLD Certified.
12 With HP Latex Inks. UL GREENGUARD found HP PVC-free Durable Suede Wall Paper, which is designed with a breathable construction, to be highly mold and mildew resistant using test method GGTM.P040 and following the guidelines of ASTM D 6329. See greenguard.org/en/CertificationPrograms/listingprograms_copy1/ CertificationPrograms_microbialProgram.aspx. No products are mold proof. It is uncertain that any material will resist mold or mildew indefinitely.
13 Interior in-window display ratings by HP Image Permanence Lab on a range of media including HP printing materials. See HPLFMedia.com/t/printpermanence.
14 Water resistance testing by HP Image Permanence Lab on a range of media including HP media; water resistance is comparable to eco- and low-solvent inks when printed on water resistant substrates. Water resistance testing follows ISO 18935 method. Results may vary based on specific media performance. See HPLFMedia.com/t/printpermanence.
15 According to European Standard EN15102.